The DN1-DR-RD filler is capable of filling non-foaming liquid and semi-liquid products into containers from 20 to 220 liters (5 to 55 gallons). It is normally used for filling 50 to 220 liters (15 to 55 gallons).
The operator rolls a container on the platform below the nozzle and presses the operating button. The nozzle tip descends into the drum approximately 100 mm/4", opens and begins filling. When the container approaches the target weight, "dribble-flow" automatically reduces the flow rate to achieve high accuracy. When the weight reaches the shut-off weight, the nozzle closes and rises. The operator rolls the drum to the discharge conveyor and places the next empty container on the filling platform.
While the next container fills, the operator will normally close and label the last-filled container.
| CONTAINER- | 50 Liter | 100 Liter | 205 Liter |
|---|---|---|---|
| 16 Gal. | 30 Gal. | 55 Gal. | |
| 120 | 90 | 60 |
The DN1-DR-RD/S filler is a sub-surface filler capable of filling foaming or non-foaming liquid and semi-liquid products into containers from 20 to 220 liters (5 to 55 gallons). It is normally used for filling 50 to 220 liter (15 to 55 gallons).
The operator rolls a container on the platform below the nozzle and presses the operating button. The nozzle tip descends to the bottom of the the drum, opens and begins filling. The nozzle rises slowly as the drum fills. When the fill nears the target weight, the product flow is automatically reduced for a highly accurate fill. When the shut-off weight is reached, the nozzle closes and rises. The operator rolls the drum to the discharge conveyor and places the next empty container on the filling platform.
While the next container fills, the operator will normally close and label the last-filled container.
| CONTAINER- | 50 Liter | 100 Liter | 205 Liter |
|---|---|---|---|
| 16 Gal. | 30 Gal. | 55 Gal. | |
| 120 | 90 | 60 |
The DN1-PL-ID is a top fill filler suited for filling non-foaming products and the DN1-PL-ID/S is a sub-surface filler that is capable of filling foaming or non-foaming products. Both machines are capable of filling from 50 to 220 liters (15 gallon to 55 gallons), as well as totes.
When filling drums, the operator moves a pallet of drums onto the platform. The operator moves the filling nozzle above the opening of the first drum and presses the operating button. The nozzle lowers into the drum, opens and begins filling. With the DN1-PL-ID/S the nozzle descends to the bottom of the container and rises as the fill proceeds. When the container reaches the slow-flow weight the product flow is reduced for accurate filling. When the shut-off weight is reached, the nozzle closes and rises from the container. After the first drum is filled, the operator moves the nozzle above the opening of the second drum and begins a fill. When all drums are filled, the operator moves the filled pallet to the discharge conveyor, where the drums are closed and labeled. The next pallet of empty drums is moved onto the filling platform.
When filling totes, the operator moves the tote onto the filling platform. The operator moves the filling nozzle above the opening and presses the operating button. The nozzle lowers into the drum, opens and begins filling. With the DN1-PL-ID/S the nozzle descends to the bottom of the container rises as the fill proceeds. When the tote reaches the slow-flow weight, the product flow is reduced. When the shut-off weight is reached, the nozzle closes and rises from the container. When the tote is filled, the operator moves the tote to the discharge conveyor where the drums it is closed and labeled. The next empty tote is moved onto the filling platform.
| CONTAINER- | 50 Liter | 100 Liter | 205 liter |
|---|---|---|---|
| 16 gal. | 30 gal. | 55 Gal. | |
| 100 | 100 | 50 |
DN1-DR-ID SPECIFICATION SHEET
DN1-DR-ID/S SPECIFICATION SHEET
DN1-PL-ID SPECIFICATION SHEET
DRUM CLOSING TOOLS
Fillers for Kegs and Quarter Drums
HOME REQUEST INFORMATION
Drum and Tote Filling Machines - General Bulletin (.pdf)